Although a wrought iron or metal gate can endure a lot longer, it does require regular maintenance and careful maintenance. As any homeowner knows, a broken gate can be a major annoyance. Not only is it unsightly, but it can also make it difficult to keep your property secure. If you’re dealing with a broken gate, there are a few things you can do to fix the problem. For example, if your gate is stuck, you may be able to fix the problem by simply lubricating the hinges. However, if the damage is more severe, you may need to replace the entire gate. In addition, if the frame is warped or the pickets are broken, you may need a welding repair or replacement. Finally, if rust is an issue, you’ll need to sand down the metal and apply a fresh coat of paint. Give Automatic Gate Company a call so you can keep your gate looking and functioning like new.
- Gate Stuck Closed or Open: Driveway gates are a great way to add security and privacy to your home, but they can also be a source of frustration when they get stuck. The most common cause of a stuck gate is an obstruction in the track or mechanical failure. Sometimes, the problem can be resolved by simply clearing the track or lubricating the hinges. However, if the gate opener is not working correctly, you may need to call a professional for help. In some cases, the problem may be electrical, requiring a new gate opener or circuit board. No matter what the cause, a stuck driveway gate can be a hassle. With a little troubleshooting, however, you should be able to get your gate back up and running in no time.
- Rust: Over time, metal gates can develop rust. This is unsightly and can weaken the structure of the gate. If you have a metal gate that is starting to show signs of rust, there are a few things you can do to stop it from getting worse. First, sand down the area to remove any loose rust. Next, apply a primer to the metal to help prevent the rust from coming back. Finally, paint over the primer with a color that will complement your home. If the rust has already caused serious damage to the metal, you may need to cut away the affected area and weld on a new piece of metal. With a little bit of effort, you can keep your metal gate looking like new for years to come.
- Broken Welds: Over time, even the most well-built metal gates can develop broken welds. There are several reasons why this might happen, including metal fatigue, aging, and accidental damage. In some cases, broken welds can be repaired. However, if the damage is severe, it may be necessary to replace the entire gate. In either case, it is important to have the work done by a qualified and professional company such as Automatic Gate Company. Improperly repaired or replaced welds can create new problems and may even lead to accidents. As such, it is always best to entrust this type of work to a knowledgeable and experienced company.
- Broken or Bent Pickets: Iron pickets are a classic choice for driveway and garden gates, as well as for fence panels. Unfortunately, they can be vulnerable to damage from weather and wear and tear. If you have broken or bent iron pickets, you may be wondering if it’s time to replace them. Iron picket replacement is not always necessary. In many cases, damaged pickets can be repaired by straightening out any bent pickets. Damaged pickets that need replacing can be done so by welding the replacement picket to the frame of the gate or fence. Once the repairs are complete, prime and paint the pickets to protect them from rust. With a little effort, you can keep your iron pickets looking like new for years to come.
- Sagging Gates: Any homeowner with a driveway gate knows the importance of a properly functioning gate. Not only does it provide security and privacy, but it also adds curb appeal to your home. However, metal gates can sometimes start to sag, making them difficult to open and close. There are several possible causes of a sagging gate, including hinges that need adjustment, a hinge post leaning that needs to be replaced. Hinge adjustment is the simplest solution and can often be done without professional help. If the post is leaning, you may need to replace it. Hinge post replacement is a more involved process and usually requires the help of a professional. No matter what the cause of your sagging gate, there are solutions available to help you get your gate back in working order.
Warped or Damaged Frame: When a car bumps into a gate it can often result in a damaged driveway gate frame. The same is true for a driveway gate that has been damaged in a vehicle accident. If the damage is severe enough, it can cause the gate to warp. This can make it difficult to open and close the gate, as well as preventing it from sealing properly. In some cases, a warped gate may even need to be replaced. If you find yourself in this situation, it’s important to contact a professional company such as Automatic Gate Company to assess the damage and determine the best course of action.